JETmaster TP – up to 240 zones, just like that

The main features in brief:

  • Extended mould diagnosis
  • For 24 to 240 zones in steps of 8
  • 230V / 16A per zone
  • Industrial PC with 15” touch panel
  • Software updates per download

When you need that little bit of extra in terms of performance

Up to 240 zones on four wheels with maximum operating comfort: Clear touch panel and maximum data compatibility – this “control cabinet” is where it’s at! The JETmaster TP, the floor-mounted device from our systematic TP series, combines all the requirements for optimum process reliability and ease of use in one device. Once connected, all moulds are immediately operational again without the need for a restart. Comfortable: the control via industrial PC with large touch panel. Profitable: Maximum-sized external cooling elements ensure that the device remains maintenance- and wear-free.

JETmaster TP

Technical data

Aluminium, colour RAL 5010 gentian blue, special colours available upon request

See table “equipment designs”

Temperature control:
Microprocessor controlled multi-loop controller with automatic computation of the control parameters for each zone

Operation / Visualisation:
Industrial PC with 15” touch panel

Sensor input:
Thermocouple Fe/CuNi, switchable to Ni/CrNi with internal thermocouple reference junction

Temperature range:
0-500 °C, switchable to 32-932 °F

Calibration accuracy:
≤ 0.25%

Heating outputs:
max. 230 VAC/16 A =3680 W per zone, trouble-free switching algorithm, secured by super-fast-acting (FF) safety fuses 16A, 6.3 x 32mm

Alarm output:
Potential-free alarm contact, max. load up to 250VAC / 2A (can be inverted)

Safety shutdown:
Load shedding in the case of failed Triac (short circuit)

Reduction / Boost:
Can be switched both manually and externally via the 24 VDC control circuit

Mould connection:
According to customer specification

Power supply:
400 VAC +10…-10%, 50…60Hz, 3P / N / PE, other voltages upon request

Power supply:
CEE 32 A, CEE 63 A, CEE 125 A, Multiple feed, connector

Interfaces: 1x USB-external, 1x Ethernet, OPC/UA,
optional RS232, RS485, TTY

Control fuse:
Safety fuse MT 6.3 A, 5 x 20 mm

Ambient temperature:
Operation 0…+55 °C, storage -30…+70 °C

Climatic application class:
According to DIN 40 040, relative humidity 75% in the annual average, no condensation

Protective system:

Protection class:

JETmaster TP

The structure


User interface:

Industrial PC with 15“ touch panel, optionally with offset screen. The JETmaster TP is fanless and maintenance-free.

  1. Industrial PC with 15” touch panel
  2. Fuses

Device rear view:

All device data and mould settings can be centrally stored and managed via the Ethernet connection. We will manufacture the mould and network connections according to your individual company standards.

  1. Ethernet connection for NVS and DMS
  2. Mould connection – custom-made for you
  3. Power supply – custom-made for you
  4. Alarm contact
  5. Reduction and boost
  6. Power switch

Possible combinations:

All device data and mould settings can be centrally stored and managed via the Ethernet connection. Furthermore, additional devices such as needle valve-control NVS and pressure measuring system DMS are linked with the devices via the Ethernet connection. These then perform the operation and visualisation. Various injection moulding machines can be connected via conventional data interfaces or via the Ethernet so that operation and visualisation occurs on the machine’s screen.

JETmaster TP

Device models:

TypeZonesItem No.Size (mm) W x H x D
JETmaster TP24 to 961610-xxxx-96*480 x 1360 x 470
JETmaster TP104 to 1441610-xxxx-144*480 x 1590 x 470
JETmaster TP152 to 1921610-xxxx-192*480 x 1800 x 470
JETmaster TP200 to 2401610-xxxx-240*special

Special versions on request

xxxx = will be replaced by a custom version number in the case of special equipment.

Subject to modifications.

Inquire now


Do you have any questions about our products? Our service advisors will be happy to help.

+49 6201 259 58-0 To the form