Let’s start with the main features:
- stackable desk device with master-slave function
- Leakage monitoring
- Multi-channel control system for 4 to 32 zones in steps of 4
- – 230V / 16A per zone
- Software updates per download
fitron TP – easy to operate
Central control 4.0 – TP is the future
One visualisation – one operation: Despite its size, the handy fitron TP turns out to be a highly user-friendly, efficient hot runner control device. Two desk devices with up to 32 zones can be combined with each other via the master-slave function and controlled per touch panel through just one device. In addition, connecting further devices, including needle valve-control and pressure measurement system, is possible via standard Ethernet connection. The fitron TP with microcontroller control meets the highest requirements for the process reliability of your plastic manufacture while remaining as small and handy as possible. A further step towards the future is the linkage of all TP hot runner controllers to a central mould server within your company network.
fitron TP
Technical data
Housing:
Aluminium, colour RAL 5010 gentian blue, special colours available upon request, practical carry handles for ease of transport
Dimensions/weight:
According to table “equipment designs”
Temperature control:
microprocessor controlled multi-loop controller with automatic computation of the control parameters for each zone
Operation / Visualisation:
Micro controller with 7“ touch panel
Sensor input:
Thermocouple Fe/CuNi, switchable to Ni/CrNi with internal thermocouple reference junction
Temperature range:
0-500 °C, switchable to 32-932°F
Calibration accuracy:
≤ 0.25%
Heating outputs:
max. 230 VAC/16 A =3680 W per zone, trouble-free switching algorithm, secured by super-fast-acting (FF) safety fuses 16A, 6.3 x 32mm
Alarm output:
Potential-free alarm contact, max. load up to 250VAC / 2A (can be inverted)
Safety shutdown:
Load shedding in the case of failed Triac (short circuit)
Reduction / Boost:
can be switched both manually and externally via the 24 VDC control circuit
Mould connection:
According to customer specification
Power supply:
400 VAC +10…-10%, 50…60Hz, 3P / N / PE, other voltages upon request
Power supply:
CEE 16 A, CEE 32 A, 4 m
Interfaces:
1X- USB external, 1x Ethernet, optional RS232, RS485, TTY
Control fuse:
Safety fuse MT 2 A, 5 x 20mm
Ambient temperature:
Operation 0…+55 °C, storage -30…+70 °C
Climatic application class:
according to DIN 40 040, relative humidity 75% in the annual average, no condensation
Protective system:
IP20
Protection class:
I
fitron TP
The structure
User interface:
Thanks to its practical carry handles, the stackable hot runner control device can easily be transported. All fuses are easily accessible from outside.
- 7″ touch panel
- USB connection
- Power button
- Fuses
Device rear wall:
We will manufacture the mould and network connection according to your individual company standards.
- Mould connection – custom-made for you
- Power supply – custom-made for you
- Ethernet connection
- Alarm contact
- Ext. Reduction and boost
Possible combinations:
All device data and mould settings can be centrally stored and managed via the Ethernet connection. Furthermore, additional devices such as needle valve-control NVS and pressure measuring system DMS are linked with the devices via the Ethernet connection. These then perform the operation and visualisation. Various injection moulding machines can be connected via conventional data interfaces or via the Ethernet so that the operation and visualisation occurs from the machine’s screen.